Common disadvantages of PE paint (3) "sagging"
Information sources:本站 | Release date:
2020-01-09 16:10:57
| Browse volume:11972
Summary:
Disadvantages: saggingcause①The paint has low viscosity, too much spraying at one time, and the coating is too thick.②When spraying, the operating angle and distance are not appropriate, or the moving speed of the spray gun is too slow, resulting in…
Disadvantages: sagging
cause
①The paint has low viscosity, too much spraying at one time, and the coating is too thick.
②When spraying, the operating angle and distance are not appropriate, or the moving speed of the spray gun is too slow, resulting in uneven coating.
③Uneven spray air pressure.
④ Too much slow-drying agent is added to the paint, causing the paint to dry too slowly.
⑤The caliber of the spray gun is too large.
⑥The paint contains dense pigments, and the mixing is uneven.
⑦The surface of the coated object is too smooth.
⑧ Too high relative humidity on site and too low temperature, resulting in slow drying of paint and excessive flow of paint.
Solution
①The viscosity of the paint is well formulated, and the thickness of the coating should not exceed 30um at a time.
② Correct the operation method, operate everything according to the operation standard, and control the appropriate spray gun moving speed.
③Add compressed air storage device to maintain stable air pressure during construction.
④ Choose the corresponding thinner according to the seasonal climate change. And control the mixing ratio and drying speed.
⑤ Choose a suitable caliber spray gun according to the actual situation, generally 1.5-2mm.
⑥ The paint should be fully stirred many times during construction.
⑦ Ensure proper roughness on the surface of the object to be coated, and carefully polish each layer.
⑧ Control the relative humidity of the work site, add a mandatory drying device, shorten the drying time, and reduce the influence of the seasonal climate on the work.
Related articles
-
2020-08-18 16:34:54
When you make a product, each ingredient is carefully selected, and this level of attention should also be given when you choose a refrigerat…
-
2020-08-18 15:56:08
(1) Gel coat wrinkles Wrinkles are mainly caused by uneven curing of the gel coat, and there are many factors that cause uneven curing, s…
-
2020-08-06 16:41:07
FRP pipes are mainly used in petroleum, chemical, electric power, metallurgy, medicine and other fields. They are light in weight, high in st…
-
2020-07-30 15:57:31
(2) Exposed fiber◇ If the gel coat is thin and the gel coat is not cured completely, the reinforcement layer is applied.◇ The fiber rolling…
-
2020-07-29 16:38:02
Provides a complete selection of pumps and blowers for fishing boats, motorboats, cruisers, yachts and commercial ships. Bilge pumps and blow…
-
2020-07-22 16:36:08
Improved sanitation facilities is a term used to classify the types or levels of sanitation for monitoring purposes. This term was created by…
Related products