Common disadvantages of PE paint (2) "orange peel"
Information sources：本站 | Release date：
2020-01-24 16:09:25
| Browse volume：15550
Summary：
Disadvantages: orange peelcause①The viscosity of the paint is too high, or too much spray at one time.② The solvent evaporates too fast, causing the paint to level out poorly.③ Improper spraying distance, insufficient air compressor pressure, and p…
Disadvantages: orange peel
cause
①The viscosity of the paint is too high, or too much spray at one time.
② The solvent evaporates too fast, causing the paint to level out poorly.
③ Improper spraying distance, insufficient air compressor pressure, and poor paint atomization.
④ Water is absorbed in paint and solvent.
⑤ The leveling of the paint itself is poor.
⑥ Poor sanding before coating will affect the leveling of the coating.
⑦ The primer is not sufficiently dried.
Solution
①Adjust the viscosity and choose a spray gun with a suitable caliber to reduce the amount of one-time spraying.
② Choose the corresponding thinner according to the seasonal climate change.
③Adjust the air compressor pressure to control the spraying distance.
④ Keep the remaining paint and solvent sealed.
⑤ Stir the paint thoroughly before use to enhance the leveling of the paint.
⑥Sanding should be smooth.
⑦When spraying multiple times, make sure that the primer is fully dried.
Related articles
-
2020-08-18 16:34:54
When you make a product, each ingredient is carefully selected, and this level of attention should also be given when you choose a refrigerat…
-
2020-08-18 15:56:08
(1) Gel coat wrinkles Wrinkles are mainly caused by uneven curing of the gel coat, and there are many factors that cause uneven curing, s…
-
2020-08-06 16:41:07
FRP pipes are mainly used in petroleum, chemical, electric power, metallurgy, medicine and other fields. They are light in weight, high in st…
-
2020-07-30 15:57:31
(2) Exposed fiber◇ If the gel coat is thin and the gel coat is not cured completely, the reinforcement layer is applied.◇ The fiber rolling…
-
2020-07-29 16:38:02
Provides a complete selection of pumps and blowers for fishing boats, motorboats, cruisers, yachts and commercial ships. Bilge pumps and blow…
-
2020-07-22 16:36:08
Improved sanitation facilities is a term used to classify the types or levels of sanitation for monitoring purposes. This term was created by…
Related products
