Summary：
(4) Fisheye◇ There is static on the mold surface, the release agent is not dry, and the release agent is not selected properly.◇ The gel coat is too thin and the temperature is too low.◇ The gel coat is contaminated by water, oil or grease.◇ Dirty…
(4) Fisheye
◇ There is static on the mold surface, the release agent is not dry, and the release agent is not selected properly.
◇ The gel coat is too thin and the temperature is too low.
◇ The gel coat is contaminated by water, oil or grease.
◇ Dirty mold or wax aggregates.
◇ Low viscosity and thixotropy index
-
2020-08-18 16:34:54
When you make a product, each ingredient is carefully selected, and this level of attention should also be given when you choose a refrigerat…
-
2020-08-18 15:56:08
(1) Gel coat wrinkles Wrinkles are mainly caused by uneven curing of the gel coat, and there are many factors that cause uneven curing, s…
-
2020-08-06 16:41:07
FRP pipes are mainly used in petroleum, chemical, electric power, metallurgy, medicine and other fields. They are light in weight, high in st…
-
2020-07-30 15:57:31
(2) Exposed fiber◇ If the gel coat is thin and the gel coat is not cured completely, the reinforcement layer is applied.◇ The fiber rolling…
-
2020-07-29 16:38:02
Provides a complete selection of pumps and blowers for fishing boats, motorboats, cruisers, yachts and commercial ships. Bilge pumps and blow…
-
2020-07-22 16:36:08
Improved sanitation facilities is a term used to classify the types or levels of sanitation for monitoring purposes. This term was created by…
